Trencher HP 2.8" BELTED Tires MTD Raid 6x30 Whls F/R (PRO1016810)

This is a pair of pre-mounted Trencher HP 2.8" Belted All Terrain Tires. 

Pro-Line is proud to introduce the History making Trencher HP 2.8" BELTED All Terrain Truck Tires! 

Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the new Trencher HP. 

These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 2.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. 

Just like all Pro-Line's tires, they are proudly Made in the USA! Just like the original Trencher 2.8" tire, the next generation Trencher HP 2.8" is destined to become the ultimate, go-to Bash tire for your truck!

Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 5,000 RPM under ideal conditions in testing. 

Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.

The new Belted Trencher HP 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. 

Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (6335-00 Replacement Hexes). 

You can even upgrade your wheels to 17mm wheel hexes (6336-00 Sold Separately) or go for Aluminum hex adapters for extreme bashing fun! These new Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. 

The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Trencher HP 2.8" Belted tires now!

Pre-mounted Trencher HP 2.8" Belted Tires on Raid Black 6x30 Removable Hex Wheels (2 pcs)

6x30 to 12mm Hex Adapters (Narrow & Wide) (2 pcs of each)

M3 x 12mm long SHCS hardware (12 pcs)

Height: 4.87" (123.7mm)  

Width: 2.86" (72.64mm)