Menu
Your Cart

T4 2020

Merk: Hudy Model: H293083
Hudy Pure Tungsten Weight 15GPrecision machined 15g pure tungsten chassis weight. Universal weight that can be mounted anywhere.The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weig..
Beschikbaarheid:
€ 22,95
Excl. BTW:€ 18,97
Merk: Xray Model: X300902
T4 2020 Ars - Active Rear Suspension SetARS suspension set consists of: suspension arms, alu 0° C-hubs, hard steering blocks, and ARS linkages which connect suspension holders with the suspension block. The angle of ARS linkages –set by adding/removing shims on the suspension block and suspensi..
Beschikbaarheid:
€ 142,95
Excl. BTW:€ 118,14
Merk: Xray Model: X301000
T4'20 Graphite Chassis 2.2Mm..
Beschikbaarheid:
€ 122,95
Excl. BTW:€ 101,61
Merk: Xray Model: X301001
T4’20 chassis is designed and developed for the centrally positioned layshaft. The chassis is completely redesigned to work with the narrower mounting bulkheads and allows to mount both longer suspension arms as well as optional short arms. The alu solid chassis gives better control, stabi..
Beschikbaarheid:
€ 122,95
Excl. BTW:€ 101,61
Merk: Xray Model: X301002
T4'20 Alu Flex Chassis 2.0Mm - Swiss 7075 T6..
Beschikbaarheid:
€ 135,95
Excl. BTW:€ 112,36
Merk: Xray Model: X301003
T4 2020 Alu Extra-Flex Chassis 2.0Mm - Swiss 7075 T6Aluminum T4’20 chassis with special cutout openings for increased flex. This chassis is recommended for low traction carpet tracks and high traction asphalt tracks. (Not recommended for high- and very-high traction conditions where either the #3010..
Beschikbaarheid:
€ 135,95
Excl. BTW:€ 112,36
Merk: Xray Model: X301060
T4'20 Graphite Upper Deck 2.0Mm..
Beschikbaarheid:
€ 49,95
Excl. BTW:€ 41,28
Merk: Xray Model: X301061
T4'20 Graphite Upper Deck 1.6MmTop deck was designed to work with the center layshaft location in the middle of the chassis. The top deck is perfectly symmetrical to achieve the ideal, consistent flex behavior.This 1.6mm graphite top deck is recommended for use in low- to medium-traction conditions ..
Beschikbaarheid:
€ 44,95
Excl. BTW:€ 37,15
Merk: Xray Model: X301159
Alu Countersunk Shim (4)..
Beschikbaarheid:
€ 5,95
Excl. BTW:€ 4,92
Merk: Xray Model: X301159-O
Alu Countersunk Shim - Orange (4)..
Beschikbaarheid:
€ 5,95
Excl. BTW:€ 4,92
Merk: Xray Model: X301172
Alu Upper Deck Collar For Flex Elimination..
Beschikbaarheid:
€ 11,95
Excl. BTW:€ 9,88
Merk: Xray Model: X301203
T2 Impact Absorbing Front Bumper..
Beschikbaarheid:
€ 9,95
Excl. BTW:€ 8,22
Merk: Xray Model: X301204
Composite Bumper For Adjustable Body Mounts..
Beschikbaarheid:
€ 7,95
Excl. BTW:€ 6,57
Merk: Xray Model: X301208
Graphite bumper upper holder brace helps to reduce chassis breakage in serious crashes. The graphite bumper upper holder brace is mounted on the top composite or graphite upper holder for the bumper. The brace matches the shape of the bulkhead so if a crash occurs, the brace touches the bu..
Beschikbaarheid:
€ 13,95
Excl. BTW:€ 11,53
Merk: Xray Model: X301210
T4 Graphite Bumper Upper Holder for Adj. Body Mounts 2.5mm•          Graphite upper bumper holder •          Direct replacement for composite bumper •          Ext..
Beschikbaarheid:
€ 20,95
Excl. BTW:€ 17,31
Merk: Xray Model: X301219
Composite Upper Holder For Bumper For Adjustable Body Mounts..
Beschikbaarheid:
€ 7,95
Excl. BTW:€ 6,57
Merk: Xray Model: X301231
Foam Bumper For Adjustable Body Mounts - Light..
Beschikbaarheid:
€ 14,95
Excl. BTW:€ 12,36
Merk: Xray Model: X301232
Xray T4 Foam Bumper for Adjustable Body Mounts HardExtra-hard foam materialIncreases protectionFor eccentric & centric body mounts High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Direct replacement of the standard bumper, this extra hard bump..
Beschikbaarheid:
€ 18,95
Excl. BTW:€ 15,66
Weergeven 1 t/m 18 van in totaal 421