RC4WD RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift

RC4WD RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift

The ultra popular 1/10 BendPak XPR-9S Two-Post Auto Lift now comes in grey to more closely reflect its current 1:1 counterpart

This is the new Licensed 1/10 BendPak XPR-9S Two-Post Auto Lift. These have been Officially Licensed by the BendPak company and are only available from RC4WD and our Dealers. 

Complete with battery and fully functional allowing for that ultimate scale garage look.

Specifications:

Billet Aluminum Lift Towers, Lift Arms and Lift Base

Steel Lift Screws

Lifting Capacity: /10kg

The Overall Height: 420mm

The Overall Width: 430mm

Column Width:  40mm

Arms Width:  16mm

Lift Height Max:  240mm

Time To Full Rise: 50 sec

JST-PH 2.0 Battery Plug Connector

What's Included:

1x RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift

1x RC4WD MX1.25mm Female to XT60 Female Conversion Cable (Z-S0572)

1x Battery Pack

1x BendPak Decal Sheet

1x Warning Decal Sheet

1x Instruction Manual

Instruction Manuals:

Click here to download.

Required Parts:

Charger needed with an appropriate plug to charge the included NIMH battery pack

RC4WD 6-Cell 1400mAh NIMH Battery Pack (Z-E0108)

Replacement Hardware:

Steel Flat Head Cap Screw M2 X 4mm (Z-S1516)

Steel Flat Head Cap Screw M3 x 8mm (10) (Z-S0649)

Steel Button Head Cap Screws M3 x 4mm (Z-S0745)

Steel Button Head Cap Screws M3 x 8mm (Z-S0652)

Steel Socket Head Cap Screws M2 x 10mm (Z-S0849)

Steel Socket Head Cap Screws M2 X 6mm (Z-S0611)

Steel Flat Head Cap Screws M3 x 10mm (Z-S0860)

Steel Socket Head Cap Screws M2.5 x 10mm (Z-S1290)

Steel Socket Head Cap Screws M2.5 x 6mm (Z-S0855)

M3 X 3mm Set screw (Z-S0124)

Notes:

Adjustable Arms to fit many different vehicles

BendPak is a registered trademark of the BendPak XPR-9S company. 

The BendPak logo is property of BendPak XPR-9S and used under license by RC4WD.