Menu
Your Cart

Ezrun MAX10 G2S 80A Combo with 3652SD-5400kV-G3

Ezrun MAX10 G2S 80A Combo with 3652SD-5400kV-G3
Ezrun MAX10 G2S 80A Combo with 3652SD-5400kV-G3
€ 131,90
Ex Tax: € 109,01
  • Beschikbaarheid:
  • Brand: Hobbywing
  • Model: HW38010208

✅ Traxxas Premium store
Specialist in Traxxas auto's en onderdelen

✅ Grootste Traxxas voorraad van het noorden
Veel modellen en onderdelen direct op voorraad

✅ Webshop en fysieke winkel
Online bestellen of langskomen in Hollandscheveld

✅ Bestaan sinds 2006
Jarenlange ervaring met RC

⭐ Klantbeoordeling 4,9/5

☎ Vraag over dit artikel? WhatsApp ons
Persoonlijk advies • We reageren zo snel mogelijk

This combo features the Ezrun MAX10 G2S 80 A ESC paired with the Ezrun 3652SD G3 motor rated at 5400kV, creating a factory-matched 1/10 scale drivetrain package.

While maintaining the same power ratings and casing as the MAX10 G2, the MAX10 G2S introduces enhancements such as internal data logging and an 8.4 V BEC setting for compatibility with high-voltage servos. The HW LINK app allows users to set parameters, review data, and perform firmware updates.

Note that turbo timing can only be activated with Hobbywing motors, and overheat protection also requires a supported Hobbywing motor, both of which are available with the included Ezrun 3652SD G3.

Notes:

  • A 3S battery or larger is required for 7.4 V or 8.4 V at the BEC.
  • The effective Bluetooth range is approximately 5 m by design.
  • Optional accessories include: LCD Program Box Pro (HW30502002) and OTA Bluetooth Program Module (HW30850400).

Highlights:

  • Bluetooth module integrated into the power switch for smartphone programming without extra devices.
  • Internal logging of the last 10 minutes of runtime, with graphical review in the HW LINK app.
  • Turbo timing up to 20 degrees, raising maximum RPM by up to approximately 25% with the supplied motor.
  • Three-step BEC: 6 V / 7.4 V / 8.4 V at 5 A in switch mode.
  • Frameless fan with side air discharge, activated by temperature.
  • ESC and motor dust- and waterproof to IP67, with waterproof sensor cable.
  • Capacitor overheat protection; protection against low voltage, overheating, and loss of signal.
  • 4-pole rotor for high torque, quick acceleration, and stable performance; CNC-machined aluminum motor housing and high-precision bearings.

Technical Specifications

  • Type: Brushless, Sensored
  • Current (Cont./Peak): 80 A / 520 A
  • Input Voltage: 2–3S LiPo
  • BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
  • Motor Limit: 2S LiPo: KV ≤ 6000 / 3S LiPo: KV ≤ 4200 (3652/3665 size motor)
  • Turbo Timing: up to 20 degrees
  • Fan: Yes, powered by the BEC
  • Programming: Bluetooth (HW LINK app) / LCD program box / OTA program module
  • Programming Port: Separate, 3-pin
  • Waterproof: Yes, to IP67
  • Input: XT60
  • Output: Gold bullet sockets
  • Dimensions: 53 × 39.5 × 37.2 mm
  • Weight: 227 g
  • Application: 1/10 On-Road / Off-Road Short Course Truck (light duty)
  • kV Rating: 5400kV
  • No-Load Current: ≤ 6.8 A
  • Cells: 2S LiPo
  • Poles: 4
  • Length: 53 mm
  • Diameter: 37 mm
  • Shaft Diameter: 3.175 mm

Write a review

Note: HTML is not translated!
Bad Good
Captcha