Menu
Your Cart

Ezrun MAX10 G2S 80A Combo with 3652SD-4100kV-G3

Ezrun MAX10 G2S 80A Combo with 3652SD-4100kV-G3
Ezrun MAX10 G2S 80A Combo with 3652SD-4100kV-G3
€ 131,90
Ex Tax: € 109,01
  • Beschikbaarheid:
  • Brand: Hobbywing
  • Model: HW38010207

✅ Traxxas Premium store
Specialist in Traxxas auto's en onderdelen

✅ Grootste Traxxas voorraad van het noorden
Veel modellen en onderdelen direct op voorraad

✅ Webshop en fysieke winkel
Online bestellen of langskomen in Hollandscheveld

✅ Bestaan sinds 2006
Jarenlange ervaring met RC

⭐ Klantbeoordeling 4,9/5

☎ Vraag over dit artikel? WhatsApp ons
Persoonlijk advies • We reageren zo snel mogelijk

This combo pairs the Hobbywing Ezrun MAX10 G2S 80 A ESC with the factory-matched Ezrun 3652SD G3 motor (4100 kV) as a 1/10-scale drivetrain package. Compared with the MAX10 G2, the MAX10 G2S retains the same power ratings and case. The HW LINK app supports parameter setup, data review and firmware updates, and the G2S adds internal data logging plus an 8.4 V BEC setting intended for high-voltage servos. Turbo timing can be enabled only with Hobbywing motors, and motor overheat protection similarly requires a supported Hobbywing motor; both functions are available with the supplied Ezrun 3652SD G3 motor.

Features

  • Bluetooth module integrated into the power switch for smartphone programming without extra devices.
  • Internal logging of the last 10 minutes of runtime, with graphical review in the HW LINK app.
  • Turbo timing up to 20 degrees; can raise maximum RPM by up to approx. 25% when used with the supplied motor.
  • Three-step BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode).
  • Frameless fan with side air discharge; fan is switched on by temperature.
  • ESC and motor are dust- and waterproof to IP67, including a waterproof sensor cable.
  • Capacitor overheat protection; protections for low voltage, overheating and loss of signal.
  • Motor: 4-pole rotor for high torque and stable performance; CNC-machined aluminium motor housing and high-precision bearings.

Notes

  • A 3S battery or larger is required to obtain 7.4 V or 8.4 V at the BEC.
  • The effective Bluetooth range is approximately 5 m by design.
  • Optional accessories: LCD Program Box Pro (HW30502002) and OTA Bluetooth Program Module (HW30850400).

Technical Specifications

  • Type: Brushless, Sensored
  • Current (Cont./Peak): 80 A / 520 A
  • Input Voltage: 2–3S LiPo
  • BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
  • Motor Limit: 2S LiPo: KV ≤ 6000 / 3S LiPo: KV ≤ 4200 (3652/3665 size motor)
  • Turbo Timing: up to 20 degrees
  • Fan: Yes, powered by the BEC
  • Programming: Bluetooth (HW LINK app) / LCD program box / OTA program module
  • Programming Port: Separate, 3-pin
  • Waterproof: Yes, to IP67
  • Input: XT60
  • Output: Gold bullet sockets
  • Dimensions: 53 × 39.5 × 37.2 mm
  • Weight: 228 g
  • Application: 1/10 On-Road / Off-Road Short Course Truck (light duty)
  • kV Rating: 4100kV
  • No-Load Current: ≤ 5.0 A
  • Cells: 2–3S LiPo
  • Poles: 4
  • Length: 53 mm
  • Diameter: 37 mm
  • Shaft Diameter: 3.175 mm

Write a review

Note: HTML is not translated!
Bad Good
Captcha