Menu
Your Cart

Ezrun MAX10 G2S 80A Combo with 3652SD-3300kV-G3

Ezrun MAX10 G2S 80A Combo with 3652SD-3300kV-G3
Ezrun MAX10 G2S 80A Combo with 3652SD-3300kV-G3
€ 131,90
Ex Tax: € 109,01
  • Beschikbaarheid:
  • Brand: Hobbywing
  • Model: HW38010206

✅ Traxxas Premium store
Specialist in Traxxas auto's en onderdelen

✅ Grootste Traxxas voorraad van het noorden
Veel modellen en onderdelen direct op voorraad

✅ Webshop en fysieke winkel
Online bestellen of langskomen in Hollandscheveld

✅ Bestaan sinds 2006
Jarenlange ervaring met RC

⭐ Klantbeoordeling 4,9/5

☎ Vraag over dit artikel? WhatsApp ons
Persoonlijk advies • We reageren zo snel mogelijk

This combo pairs the Ezrun MAX10 G2S 80 A ESC with the Ezrun 3652SD G3 3300kV motor, supplied as a factory-matched 1/10 scale drivetrain package.

Compared with the MAX10 G2, the MAX10 G2S retains the same power ratings and case. The HW LINK app provides parameter setup, data review and firmware updates. The G2S also adds internal data logging and an 8.4 V BEC setting for high-voltage servos.

Turbo timing can only be enabled with Hobbywing motors; motor overheat protection likewise requires a supported Hobbywing motor. Both functions are available with the supplied Ezrun 3652SD G3.

Highlights

  • Bluetooth module integrated into the power switch for smartphone programming without extra devices.
  • Internal logging of the last 10 minutes of runtime, with graphical review in the HW LINK app.
  • Turbo timing up to 20 degrees, raising maximum RPM by up to approx. 25% with the supplied motor.
  • Three-step BEC: 6 V / 7.4 V / 8.4 V at 5 A in switch mode.
  • Frameless fan with side air discharge, activated by temperature.
  • ESC and motor dust- and waterproof to IP67, with waterproof sensor cable.
  • Capacitor overheat protection; protection against low voltage, overheating and loss of signal.
  • 4-pole rotor for high torque, quick acceleration and stable performance; CNC-machined aluminium motor housing and high-precision bearings.

Notes

  • A 3S battery or larger is required for 7.4 V or 8.4 V at the BEC.
  • The effective Bluetooth range is approx. 5 m by design.
  • Optional accessories: LCD Program Box Pro (HW30502002), OTA Bluetooth Program Module (HW30850400).

Technical Specifications

  • Type: Brushless, Sensored
  • Current (Cont./Peak): 80 A / 520 A
  • Input Voltage: 2–3S LiPo
  • BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
  • Motor Limit: 2S LiPo: KV ≤ 6000 / 3S LiPo: KV ≤ 4200 (3652/3665 size motor)
  • Turbo Timing: up to 20 degrees
  • Fan: Yes, powered by the BEC
  • Programming: Bluetooth (HW LINK app) / LCD program box / OTA program module
  • Programming Port: Separate, 3-pin
  • Waterproof: Yes, to IP67
  • Input: XT60
  • Output: Gold bullet sockets
  • Dimensions: 53 × 39.5 × 37.2 mm
  • Weight: 228 g
  • Application: 1/10 On-Road / Off-Road Short Course Truck (light duty)
  • kV Rating: 3300kV
  • No-Load Current: ≤ 3.9 A
  • Cells: 2–3S LiPo
  • Poles: 4
  • Length: 53 mm
  • Diameter: 37 mm
  • Shaft Diameter: 3.175 mm

Write a review

Note: HTML is not translated!
Bad Good
Captcha