Menu
Your Cart

Ezrun MAX10 G2S 140A Combo with 3665SD-4000kV-G3

Ezrun MAX10 G2S 140A Combo with 3665SD-4000kV-G3
Ezrun MAX10 G2S 140A Combo with 3665SD-4000kV-G3
€ 164,90
Ex Tax: € 136,28
  • Beschikbaarheid:
  • Brand: Hobbywing
  • Model: HW38010211

✅ Traxxas Premium store
Specialist in Traxxas auto's en onderdelen

✅ Grootste Traxxas voorraad van het noorden
Veel modellen en onderdelen direct op voorraad

✅ Webshop en fysieke winkel
Online bestellen of langskomen in Hollandscheveld

✅ Bestaan sinds 2006
Jarenlange ervaring met RC

⭐ Klantbeoordeling 4,9/5

☎ Vraag over dit artikel? WhatsApp ons
Persoonlijk advies • We reageren zo snel mogelijk

This combo pairs the Ezrun MAX10 G2S 140 A ESC with the matching Ezrun 3665SD G3 4000 kV motor in a factory-matched 1/10-scale drivetrain package.

Compared with the MAX10 G2, the MAX10 G2S retains the same power ratings and case. The HW LINK app enables parameter setup, data review and firmware updates. The G2S adds built-in data logging and an 8.4 V BEC option for high-voltage servos.

Turbo timing works only with Hobbywing motors; motor overheat protection also requires a supported Hobbywing motor. Both functions are available with the included Ezrun 3665SD G3.

Notes

  • A 3S pack or higher is required to use the 7.4 V or 8.4 V BEC settings.
  • The Bluetooth range is approximately 5 m by design.
  • Optional accessories: LCD Program Box Pro (HW30502002) and OTA Bluetooth Program Module (HW30850400).

Features

  • Integrated Bluetooth module in the power switch enables smartphone programming without extra hardware.
  • Internal logging of the last 10 minutes of runtime with graphical review in the HW LINK app.
  • Turbo timing up to 32 degrees, increasing maximum RPM by up to approximately 25% with the supplied motor.
  • Three-step BEC: 6 V / 7.4 V / 8.4 V at 5 A (switch mode).
  • Frameless fan with side air discharge, temperature-controlled.
  • ESC and motor dust- and waterproof to IP67, with a waterproof sensor cable.
  • Capacitor overheat protection; protection against low voltage, overheating and loss of signal.
  • 4-pole rotor for high torque, quick acceleration and stable performance; CNC-machined aluminium motor housing and high-precision bearings.

Technical Specifications

  • Type: Brushless, Sensored
  • Current (Cont./Peak): 140 A / 880 A
  • Input Voltage: 2–4S LiPo
  • BEC: 6 V / 7.4 V / 8.4 V adjustable, 5 A continuous (switch mode)
  • Motor Limit: 2S LiPo: KV ≤ 6000 (3652 size motor) / 3S LiPo: KV ≤ 4000 (3665 size motor) / 4S LiPo: KV ≤ 2600 (4268 size motor)
  • Turbo Timing: up to 32 degrees
  • Fan: Yes, powered by the BEC
  • Programming: Bluetooth (HW LINK app) / LCD program box / OTA program module
  • Programming Port: Separate, 3-pin
  • Waterproof: Yes, to IP67
  • Input: XT60
  • Output: Gold bullet sockets
  • Dimensions: 53 × 39.5 × 37.2 mm
  • Weight: 297 g
  • Application: 1/10 Short Course Truck, Truggy / Monster
  • kV Rating: 4000kV
  • No-Load Current: ≤ 8.2 A
  • Cells: 2–3S LiPo
  • Poles: 4
  • Length: 65.8 mm
  • Diameter: 37 mm
  • Shaft Diameter: 5 mm

Write a review

Note: HTML is not translated!
Bad Good
Captcha