Dumont 2.8 Sand/Snow Tires Mounted for Stampede 2wd & 4wd Front and Rear, Mounted on Raid Black 6x30 Removable 12mm Hex Wheels

Dumont 2.8 Sand/Snow Tires Mounted for Stampede 2wd & 4wd Front and Rear, Mounted on Raid Black 6x30 Removable 12mm Hex Wheels

This is a pair of pre-mounted Dumont 2.8 Tires on Raid Black 6x30 Removable 12mm Hex Wheels. 

Are you ready for the most extreme 2.8 Paddle tires Pro-Line has ever made for 1:10 Monster Truck? 

Introducing the all-new Dumont 2.8 tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!

The Dumont 2.8 tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. 

Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. 

The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. 

Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:10 Monster Truck today!

Pro-Tip:

When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. 

If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. 

Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.

The Dumont 2.8 tires come Pre-Mounted on the next generation 2.8 wheel design from Pro-Line, the Raid 2.8 Removable 12mm Hex Wheel! 

Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! 

You can go from the included 12mm narrow offset (2wd Stampede/Rustler Rear) to the included 12mm wide offset hexes (2wd Stampede/Rustler Front and 4x4 Stampede/Rustler Front and Rear) quickly and easily. 

Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (6335-00 Replacement Hexes) or even upgrading your wheels to 14mm (6347-00 Sold Separately) or 17mm wheel hexes (6336-00 Sold Separately) for extreme use! 

These new Raid 2.8 wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. 

The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere!

Fits:

Stampede 2wd

Stampede 4x4

Other 1:10 Monster Trucks with 12mm Hexes

Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks!

12mm (narrow & wide)

14mm

17mm

Specs:

Height: 133mm

Width: 69mm