Let op Pinksteren gesloten.

A performance rig built to endure. When hitting the trail, you want to do it with confidence and the answer is the all-new Enduro Builder’s Kit!

At the heart of the Enduro is our revolutionary Stealth® X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional. The Stealth® X features the ability to adjust the rear drive ratio independently from the front drive in three levels. Stock overdrives the front end 5.7%, option 1 provides a one-to-one drive ratio front to rear, and option 2 overdrives the front end 11.83%.

Feeding the power to the tires are 3-piece telescopic driveshafts with an extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears. For the Builder’s Kit, we include machined steel versions of the 5.7% and 11.83% transmission gears. With the Enduro drivetrain, delivering useful and reliable power will not be an issue.

We relocated the steering link assembly from the conventional location to behind the axle (BTA). This feature greatly improves approach angle and front-end clearance, making rough terrain much easier to handle.

Knowing that every build is different, we gave you the ability to choose the wheelbase length that suits most bodies on the market. The included optional rear links allow builders to choose from among the 12.3, 12.0 and 11.8-inch (313mm, 305mm and 299mm) wheelbases. With all this packed in one box, we know the Enduro Builder’s Kit is ready for the trail – Are you?

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.


Behind-the-axle (BTA) steering

Aluminum steering plates

Integrated servo winch mount

Threaded aluminum shock bodies

CMS (Chassis Mounted Servo)

Adjustable front track bar

Universal front drive axles

Stamped steel frame rails

Enclosed water-resistant receiver box

12mm wheel hexes

Adjustable front and rear bumper mounts

Adjustable width rock sliders

Two battery boxes: one standard and one shorty

Aluminum motor plate

Adjustable body posts

Optimized ball cups for more fluid axle articulation

Adjustable rear shock mount positions

Telescopic driveshafts front and rear

Extruded aluminum driveshaft splines

One-piece rear axle design

Splined front axle with adjustable caster

Machined input pinion gear

Metal ring gear

Machined steel top shaft

Heavy duty 5mm diameter steel links

Metal ball bearings included



Scale: 1:10 Power Electric

Length: varies 

Width: varies 

Weight: varies 

Wheelbase: varies 

Transmission Ratio: varies

Drivetrain: 4WD

Build Type: Kit

Needed To Complete

1:10 scale 540-size electric motor with 48-pitchpinion gear

1:10 scale electronic crawler speed control

7.4V – 11.1V LiPo with "shorty" or “standard”battery dimensions

Battery charger (for the battery type chosenabove)

2-channel surface transmitter

2-channel receiver

Steering servo

Body and paint

Wheels with 12mm hex mounting


Other helpful items needed

- FT Body Scissors(#1737)

- Thread-locking compound (#1596)

- FTBody Reamer (#1499)

- FT Hex/Nut Driver set(#1519)

- Hobby Knife

- Needle Nose Pliers

- Wire Cutters

- Soldering Iron

- Calipers or Precision Ruler


Gratis verzending

Boven de €50,- gratis verzending NL

  • Merk: ElementRC
  • Model: EL40102
  • Beschikbaarheid: Pre-Order nu
  • € 279,95
  • Excl. BTW: € 231,36