Absima 2.4 Ghz CR4S met 2 Ontvangers

The "CR4S" is a 4-channel remote control including 2 receivers, which uses the latest AFHDS 2.4GHz "ANT" frequency hopping technology from ABSIMA

Description of the channels (the transmitter has 4 channels which are assigned as follows):

CH1: Steering wheel

CH2: Throttle lever (Trigger)

CH3: 3-position toggle switch

CH4: Push button

Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.

Trimming (TRIM): Adjustment of the straight run and throttle neutral position.

Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.

Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).

Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.